Tsi IAQ50 Manuel d'utilisateur télécharger pdf (Page 13)

13

HUMID Key

Press HUMID to toggle between %RH,

dew point or wet bulb, (as displayed on

the top line of the display). Dew point

and wet bulb are displayed in the same

units chosen for temperature measure-

ment.

READ/ENTER Key

This is a dual function key. It reads

measurement samples and it can be used

to accept a value or condition or to

return to regular measuring mode.

Press READ to take a sample reading;

the instrument takes a measurement

over five seconds. When the display is

flashing SAMPLE, it counts down the

five-second sample time: five, four,

three, two. Then the display shows

COUNT and a number. This is the num-

ber of individual readings in this test ID.

All measurements are stored in memory.

Note: Be certain to press NEXT TEST key

to save readings into a different test ID.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Commentaires sur ces manuels

Pas de commentaire